![]()
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
General Features:
- Class-D Design for lower current draw and operating temperatures, and active thermal rollback for all-day play
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- 24dB/octave LP Crossover for cleaner bass, reduced distortion, and improved subwoofer power handling
- 24dB Subsonic Filter for protection from potentially damaging frequencies
- Gain-Match LED Indicator for dialing in the perfect gain setting
- KickEQ™ Boost variable up to 6dB for louder deep bass
- Accepts up to 40-volt input signal
- Three-second turn-on / off delay to eliminate unwanted interference
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
The CXA1500.1 Mono Amplifier is built for affordable power and performance, thanks to optimized circuit layout and high-grade internal components. Additional CXA-Series Amps will be available by January 2027 featuring higher power and a fresh look.
About that Power
CX-Series Mono Amps are one-ohm stable, giving you even more power and wiring options for your system! This Class-D CXA1500.1 supplies even more bass power than its predecessor, and it features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump. A precise 24dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection while providing proper protection. Use the full-range outputs to expand your system with other bass amps or a full-range amp to complete your sound. From your dash, a simple turn of the optional CXARC Remote Bass Controller (sold separately) increases your output to fit your choice of music.
CXA-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
This CXA.1 Amplifier delivers as much as 1500 watts into one bass channel. See below for more details.
| Brand | Kicker |
| RMS Power @ 4 ohms | 550 watts x 1 channel |
| RMS Power @ 2 ohms | 1000 watts x 1 channel |
| RMS Power @ 1 ohm | 1500 watts x 1 channel |
| Series | CXA Series |
| Amplifier Class | D |
| Number of Channels | 1 - Mono |
| Total Peak Power Output | 1650 watts |
| Total RMS Power Output | 1500 watts |
| Maximum Input Gauge Size | 1/0 AWG |
| Minimum Impedance Unbridged | 1 ohm |
| Minimum Impedance Bridged | Not Bridgeable |
| Frequency Response | 15 - 200 Hz |
| THD at Rated RMS Power | 0.01 |
| Speaker Level Inputs | Optional (Requires Accessory Adapter) |
| Preamp Outputs | 1 pair |
| Built-in Crossover | Low-Pass (LP) / Subsonic |
| Low-Pass Crossover Frequency | 50 - 200 Hz |
| Subsonic Filter | 0 - 15 Hz |
| Signal-to-Noise Ratio | 95 dB |
| Bass Boost | 0 - 6 dB |
| Fuse Rating | 150A x 1 |
| Total Fuse Rating | 150 |
| Strappable | No |
| Amp Bluetooth Connectivity | No |
| Hi-Res Certified | No |
| Low-Level Input Sensitivity | 0.125 - 5 volts |
| High-Level Input Sensitivity | 1 - 40 volts |
| Compatible vehicle types | Car/Truck/SUV/Van |
| Remote bass/level controller | Optional (Accessory required and sold separately) Kicker CXARC |
| Parts Warranty | 1 Year |
| Labor Warranty | 1 Year |