We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) woofers
• (2) tweeters (each with 36" Wire attached)
• (2) Crossovers (each with 35" Input wire/ 35" Tweeter output wire/ 35" Woofer output wire attached)
• (2) Flush mount tweeter rings
• (2) Short tweeter mounting nuts
• (2) Long tweeter mounting nuts
• (2) Back angled tweeter rings
• (2) Front angled tweeter rings
• (2) Angled surface mount tweeter housings
• (12) 1" Screws
• (4) 5/8" Screws
• (8) Speed clips
• (4) 7" Zip-ties
• (4) Red plastic wire caps
• Owner's Manual
CS Speakers
A budget component system that delivers high-quality audio, the Kicker 46CSS684 is designed for car audiophiles on a tight budget but still has better audio performance than your stock car audio speakers. With two 6x8-inch woofers, two tweeters, and a pair of external crossovers, the Kicker 46CSS684 is ready to give you the full-range frequency performance you deserve.
Components
The Kicker 46CSS684 has a polypropylene cone and a polyester foam surround, giving its durability even in the harshest conditions. Thanks to the phase plug in its cones, the Kicker 46CSS684 can give you a heart-pounding but accurate bass production with minimal distortion, even if it is used for extended periods at high volume levels.
Remarkable Performance and Ultra-clean Bass
It has a pair of 0.75-inch titanium tweeters with a dome design to give you high frequencies that perfectly match the woofer's bass and mid-frequency output. The Kicker 46CSS684 also uses neodymium magnets so that you can crank up your audio source's volume with minimal breakup. It also has a pair of crossovers with a three-level tweeter setting for a more defined audio quality production.
Deliver a Continuous Power Output of 75 Watts
The Kicker 46CSS684 can deliver a continuous power output of 75 Watts and up to 225 Watts of peak power at 4 ohms. It also has a frequency response of 40 Hz to 21 kHz and a sensitivity of 90 dB, which means that it can deliver an extensive full-range performance while going loud with minimal distortion.
Brand | Kicker |
Speaker Size | 6X8 |
Design | 2-way |
Tweeter Design | 3/4" Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | Titanium |
Woofer Composition | Polypropylene |
Woofer Surround | Polyester Foam |
Sensitivity (1W at 1 meter) | 90 |
Sensitivity at 2.83 volts | N/A |
Frequency Response | 40 - 21k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 75 |
Peak Power Handling (Watts) | 225 |
Top-mount Depth (Inches) | 2.3125 |
Bottom-mount Depth (Inches) | 2.6875 |
Cutout Diameter or Length (inches) | 0 |
Mounting Height (Inches) | 0.374 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |