We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) woofers
• (2) Woofer grilles
• (2) tweeters (each with 36" Wire attached)
• (2) Crossovers (each with 35" Input wire/ 35" Tweeter output wire/ 35" Woofer output wire attached)
• (2) Flush mount tweeter rings
• (2) Short tweeter mounting nuts
• (2) Long tweeter mounting nuts
• (2) Back angled tweeter rings
• (2) Front angled tweeter rings
• (2) Angled surface mount tweeter housings
• (12) 1" Screws
• (4) 5/8" Screws
• (8) Speed clips
• (4) 7" Zip-ties
• (4) Red plastic wire caps
• Owner's Manual
Component System That Delivers High-quality Audio
A budget component system that delivers high-quality audio, the Kicker 46CSS654 is designed for car audiophiles who are on a tight budget but still have better audio performance than your stock car audio speakers. Consisting of two woofers, two tweeters, and a pair of crossovers, the Kicker 46CSS654 is ready to give you the full-range frequency performance you deserve.
Composed of a Polypropylene Cone
Its 6.5-inch woofer is composed of a polypropylene cone and a polyester foam surround, giving its durability even in the harshest conditions. Thanks to the phase plug in its cones, the Kicker 46CSS654 can give you a heart-pounding but accurate bass production with minimal distortion, even if it is used for extended periods at high volume levels.
Comes With a Pair of Crossovers
The Kicker 46CSS654 has a pair of 0.75-inch titanium tweeters with a dome design to give you high frequencies that perfectly match the woofer’s bass and mid-frequency output. It also uses neodymium magnets, so you can crank up your audio source's volume with a minimal breakup. It also comes with a pair of crossovers with a three-level tweeter setting for a more defined audio quality production.
Going Loud With Minimal Distortion
The component system can deliver a continuous power output of 100 Watts and can go up to 300 Watts of peak power at 4 ohms. Kicker 46CSS654 also has a frequency response of 35 Hz to 21 kHz and a sensitivity of 90 dB, which means that it can deliver an extensive full-range performance while going loud with minimal distortion.
Brand | Kicker |
Speaker Size | 6.5 |
Design | 2-way |
Tweeter Design | 3/4" Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | Titanium |
Woofer Composition | Polypropylene |
Woofer Surround | Polyester Foam |
Sensitivity (1W at 1 meter) | 90 |
Sensitivity at 2.83 volts | N/A |
Frequency Response | 35 - 21k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 100 |
Peak Power Handling (Watts) | 300 |
Top-mount Depth (Inches) | 1.8125 |
Bottom-mount Depth (Inches) | 2.1875 |
Cutout Diameter or Length (inches) | 4.9375 |
Mounting Height (Inches) | 0.413 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |