We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•5-Channel class-D amplifier
•Power/Ground/Turn-On plug
•(2) 2-speaker connection plugs
•(1) 1-speaker connection plug
•(4) Mounting feet
•2.5mm Allen-wrench
•4mm Allen-wrench
•four M4x40mm Flat head machine screws
•JL Audio badge
•Owner's manual
Compact and Sleek Design
The JL Audio MHD900/5 is a versatile and powerful 5-channel car amplifier designed to deliver exceptional audio performance in your vehicle's audio system. This amplifier is part of JL Audio's MHD series, known for its high-quality sound reproduction and efficient design. The MHD900/5 features a compact and sleek design, making it easy to install in tight spaces. It provides 100 watts of power to each of its four main channels, allowing you to drive a full-range speaker system with clarity and precision.
Clean Audio Reproduction
Additionally, it delivers a whopping 500 watts of power to its fifth channel, specifically designed for powering a subwoofer. This amplifier incorporates JL Audio's patented Regulated, Intelligent Power Supply technology, which ensures that the amplifier is able to maintain in delivering full power output while its Single Cycle Control technology enables the MHD900/5 to bring out a clean audio reproduction with minimal distortion at high volume levels.
Features White and Gray Powder-coat Finishes
With its 5-channel configuration, the MHD900/5 provides flexibility in designing your car's audio system. You can power a complete speaker setup, including front and rear speakers, as well as add a subwoofer for deep bass reproduction. The JL Audio MHD900/5 amplifier is a top-of-the-line choice for car audio enthusiasts seeking high-quality sound performance and versatility. It combines power, efficiency, and advanced features to enhance your in-car audio experience.
Brand | JL Audio |
RMS Power Output (Watts x Channels) | 100 W x 4 + 500 W x 1 |
Frequency Response (Subwoofer Channel) | 12 Hz - 10 kHz (+0, -1dB) |
S/N Ratio, referred to highest rated power (Main Channels) | >108.5 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
S/N Ratio, referred to 1 W (Main Channels) | >88.2 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
Damping Factor @ 4 ? | >400 / 50 Hz |
Damping Factor @ 2 ? | >200 / 50 Hz |
THD+N @ Rated Power (Main Channels) | <0.03% @ 4 ? |
THD+N @ Rated Power (Subwoofer Channel) | <0.05% @ 4 ? |
Input Voltage Range @ RCA Inputs | Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
Min.Copper Power / Ground Wire Gauge | Accepts up to 4 AWG wire |
Fuse Rating | 60 A (AFS, AGU or MaxiFuse) |
Height (H) | 1.93 in / 49 mm |
Width (W) | 10.74 in / 273 mm |
Depth (D) | 7.85 in / 199 mm |
Net Weight | 6.85 lb / 3.11 kg |
Filter Mode(s): Channels 1 & 2 (front) | High-Pass only |
Filter Slope(s): Channels 1 & 2 (front) | 12/24 dB/octave |
Filter Frequency Range: Channels 1 & 2 (front) | 50 Hz - 500 Hz |
Filter Mode(s): Channels 3 & 4 (rear) | High-Pass only |
Filter Slope(s): Channels 3 & 4 (rear) | 12/24 dB/octave |
Filter Frequency Range: Channels 3 & 4 | 50 Hz - 500 Hz |
Filter Mode(s): Subwoofer Channel | Low-Pass only |
Filter Slope(s): Subwoofer Channel | 12/24 dB/octave |
Filter Frequency Range: Subwoofer Channel | 50 Hz - 500 Hz |
Detented, Calibrated Filter Freq. Potentiometers | Yes |
Filter Defeat Function | Yes |
Infrasonic Filter: Subwoofer Channel | 30 Hz, Defeatable |
Remote Level Control | Optional (HD-RLC) |
Remote Level Modes | Sub Ch. only |
Channel Input Mode Switch | Yes (2/4/6 ch.) |
Pass-Through Preamp Output | None |
Source Channel Selection for PreOuts | N/A |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |