We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•One 8" Single 4-ohm voice coil subwoofer
•Black plastic trim ring (installed)
•Owner's manual
Outstanding Choice
Tiny, compact, but powerful, having the JL Audio 8W1v3-4 as your subwoofer in your car's audio system is a genuine step up from your old setup. This 8-inch subwoofer can deliver heart-pounding bass and would not need too much space to be installed inside your vehicle.
Helps Reduce Distortion
JL Audio's DMA-optimized motor design helps reduce distortion while producing a clean and punchy low-frequency performance. It also has JL Audio's famous Concentric Tube Suspension, which significantly improves the JL Audio 8W1v3-4's excursion, allowing for more air pressure and resulting in louder and better bass performance.
Has a Mica-filled Polypropylene Cone
It has a mica-filled polypropylene cone and a rubber surround, which gives the JL Audio 8W1v3-4 the rigidity and durability to withstand the stress from extended usage at high volume levels while producing an accurate bass output with only minimal distortion.
Deliver a Power Output of 150 Watts RMS
The JL Audio 8W1v3-4 can deliver a power output of 150 Watts RMS and can reach up to 300 Watts of peak power at 4 ohms. It has a frequency response of 25 up to 250 Hz and a sensitivity rate of 82.5 dB, allowing the subwoofer to go deep with an extensive low-frequency performance and be loud with less distortion.
Brand | JL Audio |
Size | 8 -inch |
Impedance (Ohms) | 4 |
Cone Material | Mica-filled polypropylene |
Surround Material | Rubber |
Port diameter (inches) | 2 |
Port length (inches) | 10 |
Max RMS Power Handling | 150 |
Peak Power Handling (Watts) | 300 |
Top Mount Depth (inches) | 3.875 |
Bottom Mount Depth (inches) | N/A |
Cutout Diameter or Length (inches) | 6.9375 |
Free-Air | No |
Dual Voice Coil | No |
Sensitivity | 84.8 dB at 1 watt |
Frequency Response | 25 - 250 Hz |
Vas (liters) | 19.26 |
Fs (Hz) | 35.4 |
Qts | 0.418 |
Xmax (millimeters) | 8 |
Ideal Sealed Box Volume (cubic feet) | 0.35 |
Minimum Sealed Box Volume (cubic feet) | N/A |
Maximum Sealed Box Volume (cubic feet) | N/A |
Ideal Ported Box Volume (cubic feet) | 0.5 |
Minimum Ported Box Volume (cubic feet) | 0.4 |
Maximum Ported Box Volume (cubic feet) | 0.65 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |