
We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•(1) 12" Single 2-ohm voice coil subwoofer
•Black plastic trim ring
•Owner's manual
Deliver Heart-pounding Bass
Compact but powerful, having the JL Audio 12W1v3-4 as your subwoofer in your car's audio system is a genuine step up from your old setup. This 8-inch subwoofer can deliver heart-pounding bass and would not need too much space to be installed inside your vehicle. The JL Audio 12W1v3-4 has a mica-filled polypropylene cone and a rubber surround, which gives the JL Audio 8W1v3-4 the rigidity and durability to withstand the stress from extended usage at high volume levels while producing an accurate bass output with only minimal distortion.
Low-frequency Performance
JL Audio's DMA-optimized motor design helps reduce distortion while producing a clean and punchy low-frequency performance. It also has JL Audio's famous Concentric Tube Suspension, which significantly improves the JL Audio 12W1v3-4's excursion, allowing for more air pressure and resulting in louder and better bass performance.
Extensive Low-frequency Performance
The JL Audio 12W1v3-4 can deliver a power output of 300 Watts RMS and can reach up to 600 Watts of peak power at 4 ohms. It has a frequency response of 25 up to 250 Hz and a sensitivity rate of 86.1 dB, allowing the subwoofer to go deep with an extensive low-frequency performance and be loud with less distortion.
| Brand | JL Audio |
| Size | 12 -inch |
| Impedance (Ohms) | 4 |
| Cone Material | Mica-filled polypropylene |
| Surround Material | Rubber |
| Port diameter (inches) | N/A |
| Port length (inches) | N/A |
| Max RMS Power Handling | 300 |
| Peak Power Handling (Watts) | 600 |
| Top Mount Depth (inches) | 5.4375 |
| Bottom Mount Depth (inches) | N/A |
| Cutout Diameter or Length (inches) | 10.9375 |
| Free-Air | No |
| Dual Voice Coil | No |
| Sensitivity | 86.1 dB at 1 watt |
| Frequency Response | 22 - 200 Hz |
| Vas (liters) | 76.63 |
| Fs (Hz) | 26.21 |
| Qts | 0.502 |
| Xmax (millimeters) | 11.4 |
| Ideal Sealed Box Volume (cubic feet) | 1.152 |
| Minimum Sealed Box Volume (cubic feet) | N/A |
| Maximum Sealed Box Volume (cubic feet) | N/A |
| Ideal Ported Box Volume (cubic feet) | 1.652 |
| Minimum Ported Box Volume (cubic feet) | N/A |
| Maximum Ported Box Volume (cubic feet) | N/A |
| Parts Warranty | 1 Year |
| Labor Warranty | 1 Year |