We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•One 10" Single voice coil 4-ohm subwoofer
•Owner's manual
Best Entry-level
One of the best entry-level car subwoofers on the market, the JL Audio 10W0v3-4 can produce a high-quality bass sound without breaking the bank. An excellent upgrade option for your car audio system, this subwoofer comes with high-level features, making it one of the best in its category.
High-quality Bass Performance
The subwoofer has a polypropylene cone and a foam surround designed to resist too much flexing while producing an accurate bass response with reduced distortion, resulting in high-quality bass performance. Its lead wire is also woven into the spider for additional strength.
Tight Bass Sound With Minimal Distortion
It comes with JL Audio's DMA-optimized motor system, giving the subwoofer a clean and tight bass sound with minimal distortion. It also has an elevated frame cooling design that allows the air to push through the voice coil, giving the subwoofer a highly efficient thermal system that can quickly dissipate the built-up heat after prolonged use.
Impressive Low-frequency Range
The JL Audio 10W0v3-4 has a power output of 300 Watts RMS at 4 ohms. It also has a frequency response of 26 up to 250 Hz and a sensitivity of 84.7 dB, making it an excellent option for all subwoofer applications, as it has an impressive low-frequency range and can go loud with minimal distortion only.
Brand | JL Audio |
Size | 10 -inch |
Impedance (Ohms) | 4 |
Cone Material | Polypropylene |
Surround Material | Foam |
Port diameter (inches) | N/A |
Port length (inches) | N/A |
Max RMS Power Handling | 300 |
Peak Power Handling (Watts) | 600 |
Top Mount Depth (inches) | 4.9375 |
Bottom Mount Depth (inches) | N/A |
Cutout Diameter or Length (inches) | 8.8125 |
Free-Air | No |
Dual Voice Coil | No |
Sensitivity | 84.07 dB at 1 watt |
Frequency Response | 25 - 250 Hz |
Vas (liters) | 31.01 |
Fs (Hz) | 32.09 |
Qts | 0.604 |
Xmax (millimeters) | 11.4 |
Ideal Sealed Box Volume (cubic feet) | 0.65 |
Minimum Sealed Box Volume (cubic feet) | N/A |
Maximum Sealed Box Volume (cubic feet) | N/A |
Ideal Ported Box Volume (cubic feet) | 1.125 |
Minimum Ported Box Volume (cubic feet) | 0.87 |
Maximum Ported Box Volume (cubic feet) | 1.35 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |