What's Included:
- Sundown Audio Salt-1 1000W Class D Amplifier
- Stinger SK4201 4000 Series 0GA Power Amplifier Wiring Kit
Product Description for Sundown Audio Salt-1
We are a Sundown Audio authorized dealer so you get up-to-date, fully warrantied products.
The Sundown Audio SALT amplifiers represent the pinnacle of Korean Class-D amplifier technology. They stand on the shoulders of the previous three generations of Sundown high-end Korean amplifiers spanning 15-years (the SAZ v.1, SAZ, v.2, and SCV series) to reach even greater heights of performance. Our customers, for many years, have asked us to produce amplifiers that produce optimum power at realistic operating voltages in the 12s rather than 14+ volts. The SALT – Sundown Audio Low-Voltage Technology – series is our answer!
Whether you are a world-class SPL competitor, a dedicated enthusiast, or even a fan of Sound Quality the SALT series will be right at home in your system. Each and every model has been created with painstaking attention to detail to ensure that they bring a smile to your face each time the music starts playing and, further, to last for many years to come.
Cosmetically they are a huge departure from our original styling as an outward indicator of the enhanced levels of performance. The heat-sink is the heaviest we have ever produced, with the most surface area, and is finished with a striking titanium color. These amplifier looks as good as they sound and as soon as you hold one in your hands the build-quality is obvious. The icing on the cake lies in the revised remote control which features temperature, voltage, and clipping indicators to easily monitor the vitals of your valuable audio system.
General Fetures:
- Digital Class-D Linkable Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 24 dB/Octave – Variable Low Pass Filter
- 24 dB/Octave – Variable Subsonic Filter
- 9 dB/Octave – Variable Bass Boost
- 180° Variable Phase Shift
- 4 Way Protection Ciruit (Thermal, Voltage, Speaker Short, DC Offset)
- Wired Remote Control with Voltage & Temperature Display and Clipping Indicator
Product Description for Stinger SK4201
We are a Stinger authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• 18ft./5.5m Matte Red Hyper-Twist 1/0GA Power Wire
• 3ft./0.9m Matte Black Hyper-Twist 1/0GA Ground Wire
• 17ft./5.2m Matte Blue 18GA Remote Turn-On Wire
• SPD5201 ANL Fuse Holder
• 250 Amp Shoc-Krome ANL Fuse
• 1/0GA Crimp Ring Terminals Pre-Installed
• 16GA Blue Butt Connector
• 1/0GA Snap In Protective Firewall Grommet
• Self-Drilling Mounting Screws
• (10) 7"/17.8cm Wire Ties
Stinger 4000 Series Power Wiring Kit
All of the Stinger power and speaker wire is made of true-spec tinned oxygen-free copper to ensure maximum power transfer. This attention to detail makes the entire Stinger 4000 series range the perfect choice for more sophisticated car audio systems.
Unmatched Performance and Reliability
Tremendous power capabilities, superior noise rejection, and exceptional signal integrity are all reasons why the Stinger 4000 series delivers unmatched performance and reliability with killer styling that looks great in any install. Stinger 4000 series wiring kits are no exception, setting the standard for top-notch connectivity.
Brand | Sundown Audio |
Specifications | Salt-1 |
Input Sensitivity | 6V - 0.2V |
Power Output 1 (RMS Linked) | 2000 x 1 @ 2 ohm |
Power Output 2 (RMS Mono) | 1000 x 1 @ 1 ohm |
Power Output 3 (RMS Mono) | 500 x 1 @ 2 ohm |
Power Output 4 (RMS Mono) | 250 x 1 @ 4 ohm |
Variable Subsonic Crossover Filter | 10HZ - 50HZ |
Variable Low Pass Filter | 35HZ - 250HZ |
Bass Boost | 45Hz 0-9dB |
Efficiency | 90% < |
Signal / Noise Ratio | 90DB < |
Damping Factor | 400 < |
Frequency Response | 10 Hz 250 HZ |
Phase Shift Control | 0-180 Degrees |
Tested Voltage & THD | 12.8V & Less Than 1% THD |
Operation Voltage | DC 9V - 15.5V Power Input |
Recommended Fuse | 300 Amps |
Dimensions | 19.68" L x 8.67" W x 2.80" H |
Specifications | SK4201 |
Amp Kit Type | Power |
Number of Amplifiers Supported | 1 |
Speaker Wire Included | No |
Remote Wire Length | 17 feet |
Interconnect (RCA) Signal Cables Included | No |
Fuse Holder | ANL |
Fuse Size | 250A |
Distribution Block Included | No |
Complies to AWG Standards | Yes |
Wire Material | OFC (100% Oxygen-Free Copper) |
Power/Ground Wire Size | 1/0 gauge |
Power Wire Length | 17 feet |
Power Wire Color | Red |
Ground Wire Length | 3 feet |
Ground Wire Color | Black |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |