Stinger X2K01

We are a Stinger authorized dealer so you get up-to-date, fully warrantied products.

What's Inside?
• (1) 18ft./5.5m Matte RED Hyper-Twist 1/0GA Power Wire
• (2) 3ft./0.9m Matte Clear Hyper-Twist 1/0GA Ground Wire
• (1) 17ft./5.2m Matte CLEAR 18GA Remote Turn-On Wire
• (1) XFDB108 XLINK Expandable Fuse Holder
• (1) 300 Amp Shoc-Krome ANL Fuse
• (3) 1/0GA Crimp Ring Terminals Pre-Installed (2 Ground 1 Power)
• (2) 1/0GA Crimp Ring Terminals
• (1) 18GA Fork Terminal
• (1) Grey Boot to match ground wire
• (1) RED Boot to match power wire
• (1) 16GA Blue Butt Connector
• (1) 1/0GA Snap In Protective Firewall Grommet
• (6) Self-Drilling Mounting Screws
• (10) 7”/17.8cm Wire Ties
• (1) 1/0 Ga Expert Terminal
• (1) 18 Ga Ferrule
• (3) 1/0 GA Ferrules with Stinger Heat Shrink Tubing
• (1) XLINK X-Pansion Jumper

Stinger X Ultimate Wiring Kits
Designed to provide the highest power transfer and system flexibility for no compromise installations. Engineered to unleash the maximum performance from your system. First, is the power distribution block to rule them all: XLINK. With its ability to transform from an inline fuse holder to an expandable power, ground, or power and ground distribution block, while able to accept 0, 4, or 8GA input/outputs and either ANL or MIDI/AFS fuse.

XLINK Block
The XLINK block is accompanied by Hyper-Twist Tru-Spec Wire, Expert Ground Terminals, Power Terminals, Wire Ferrules Remote Turn-on, and an accessories pack to complete the installation. Power delivery, and just as important but often overlooked, ground integrity, are the main goals of this kit. So, to make sure the ground potential is as equally robust as the power delivery, we have included a ground reinforcement cable to be used from the battery to the chassis, and on the amplifier side the Expert Ground Terminal for a large footprint, low resistance, non-rotating grounding terminal.