We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• 6.75" Subwoofer
• Kicker logo sticker
• (4) Adhesive backed screw covers
• Owner's Manual
CompRT Subwoofers
Kicker's slim reaper subwoofer, the Kicker 48CWRT672, is made to fit in tight spaces inside your vehicle and still be able to give you a monstrous bass output that Kicker subwoofers are renowned for. Thanks to its shallow-mount design, this 6.75-inch subwoofer can easily be installed in your car without any problems.
Forced-air Cooling
The Kicker 48CWRT672 has an injection-molded polypropylene cone and a rubber surround, allowing it to deliver a massive and accurate bass output with reduced noise at cranked-up volume levels. The mentioned materials are always for their ability to withstand the stress that comes from extended usage periods, especially at boosted volume levels.
Big Bass Anywhere
It has dual voice coils for better power handling and improved sensitivity. The Kicker 48CWRT672 also uses its proprietary Forced Air Cooling technology, allowing the 6.75-inch subwoofer to stay 25 percent cooler after long hours of use, which is way better than other subwoofers in the market.
Stout
The Kicker 48CWRT672 can handle a continuous power output of 150 Watts and has a peak power output of 300 Watts at a 2-ohm impedance. Its sensitivity rate of 82.6 dB and frequency response of 30 to 500 Hz allow it to deliver a loud bass output with minimal distortion while producing an extensive low-frequency performance.
Brand | Kicker |
Size | 6.75-inch |
Impedance (Ohms) | 1, 4 |
Cone Material | Polypropylene |
Surround Material | Santoprene Rubber |
Port diameter (inches) | N/A |
Port length (inches) | N/A |
Cutout Diameter or Length (inches) | 5.5625 |
Vas (liters) | N/A |
Fs (Hz) | N/A |
Qts | N/A |
Xmax (millimeters) | N/A |
Free-Air | No |
Dual Voice Coil | Yes |
Sensitivity | 82.6 dB at 1 watt |
Frequency Response | 30 - 500 Hz |
Max RMS Power Handling | 150 |
Peak Power Handling (Watts) | 300 |
Top Mount Depth (inches) | 2.75 |
Bottom Mount Depth (inches) | 3.3125 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |
Ideal Sealed Box Volume (cubic feet) | N/A |
Minimum Sealed Box Volume (cubic feet) | 0.18 |
Maximum Sealed Box Volume (cubic feet) | 0.75 |
Ideal Ported Box Volume (cubic feet) | N/A |
Minimum Ported Box Volume (cubic feet) | N/A |
Maximum Ported Box Volume (cubic feet) | N/A |