We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 3-way speakers
• (2) Grilles
• (2) 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other)
• (4) Red plastic wire caps
• (8) 1" Screws
• (8) Speed clips
• Owner's Manual
Polypropylene Cone and a Polyester Foam Surround
Highly known for its reputation for designing and making speakers and subwoofers with unique aesthetics, Kicker has again added another 3-way coaxial speaker into its collection. The Kicker 46CSC6934 is primarily designed to fit through all vehicles with its unique shape and shallow mounting depth.
The speaker comes with a polypropylene cone and a polyester foam surround, allowing it to perform with accurate frequency response and giving it the needed durability not to break up after long periods of usage at high volume levels.
Accurate High-frequency Reproduction
It has a 2-inch midrange driver for the low and mid-range frequencies and a 1/2-inch tweeter for the high frequencies. It has a balanced dome tweeter design made of polyetherimide and neodymium magnets for accurate high-frequency reproduction, even at higher volume levels.
It has a steel basket with an excellent venting design for efficient thermal management. It also comes with Kicker's famous Extended Voice Coil technology, allowing the speaker to produce a clean and heart-thumping bass, perfect to complement its performance in the mid and high frequencies.
Able to Produce a Wide Range of Frequencies With Clarity
The Kicker 46CSC6934 has a power output of 150 Watts RMS and can reach up to 450 Watts of peak power. Its frequency response of 30 Hz up to 20 kHz and a sensitivity rate of 92 dB only means that this 3-way speaker does not have any problem going at high volume levels without distorting, while it is also able to produce a wide range of frequencies with clarity.
Brand | Kicker |
Speaker Size | 6X9 |
Design | 3-way |
Tweeter Design | 1/2" Balanced Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | PEI |
Woofer Composition | Polypropylene |
Woofer Surround | Polyester Foam |
Sensitivity (1W at 1 meter) | 92 |
Sensitivity at 2.83 volts | N/A |
Frequency Response | 30 - 20k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 150 |
Peak Power Handling (Watts) | 450 |
Top-mount Depth (Inches) | 3.1875 |
Bottom-mount Depth (Inches) | 3.6875 |
Cutout Diameter or Length (inches) | 0 |
Mounting Height (Inches) | 0.493 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |