We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 2-way speakers
• (2) Grilles
• (2) 12" Lengths of speaker wire (tinned wire on one end and female quick slides on the other)
• (4) Red plastic wire caps
• (8) 1" Screws
• (8) Speed clips
• Owner's Manual
CS Series Speaker
Not only an excellent upgrade option to replace your car's stock speakers, but it also comes at a very affordable price option, which is perfect for those on a tight budget; the Kicker 46CSC54 is designed to fit in almost all vehicles, so you can get a high-quality sound that your old speakers cannot give you.
Polypropylene Cone and Foam Surround
The 5.25-inch speaker comes with a polypropylene cone and a foam surround, ensuring that you get an accurate bass response while still having the durability that is needed to endure the strain that comes from extended usage periods at cranked-up volume levels. The Kicker 46CSC54 uses a large woofer magnet, which allows the speaker to deliver powerful and clean bass, even with its small size.
Polyetherimide Tweeter
Kicker 46CSC54 has a 0.5-inch polyetherimide tweeter with a balanced dome design to match the woofer's powerful bass with clear and bright highs and with a minimal breakup, and with its zero-protrusion design, it can easily fit behind the typical factory grilles. It is also equipped with neodymium magnets for a louder high-frequency performance.
Power Handling
It can handle a power output of 75 Watts RMS and can go up to 225 Watts of peak power. The Kicker 46CSC54 has a sensitivity rate of 90 dB and a frequency response of 45 Hz up to 20 kHz, which means that it can seriously go loud with minimal distortion and still be able to get you a full-range frequency performance.
Brand | Kicker |
Speaker Size | 5.25 |
Design | 2-way |
Tweeter Design | 1/2" Balanced Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | PEI |
Woofer Composition | Polypropylene |
Woofer Surround | Polyester Foam |
Sensitivity (1W at 1 meter) | 90 |
Sensitivity at 2.83 volts | N/A |
Frequency Response | 45 - 20k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 75 |
Peak Power Handling (Watts) | 225 |
Top-mount Depth (Inches) | 1.8125 |
Bottom-mount Depth (Inches) | 2.0625 |
Cutout Diameter or Length (inches) | 4.5625 |
Mounting Height (Inches) | 0.272 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |