We are a Kicker authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 2-way speakers
• (2) Grilles
• (2) 11" lengths of speaker wire (tinned wire on one end and female quick slides on the other)
• (4) Red plastic butt connectors
• (8) 1-1/8" Self-tapping screws
• Owner's manual (English/ Spanish/ German/ French)
DS Series Speaker
A cheap but excellent upgrade option to replace your car's stock speakers, the Kicker 43DSC504 is designed to fit in almost all car speaker slots easily and give you a whole lot of improvement in audio quality than your last setup.
5.25" 2-Way Car Speaker
This 5.25-inch two-way car speaker comes with a polypropylene cone and a foam surround, allowing it to deliver an accurate low-frequency performance while having the durability and strength to withstand the stress from constant long hours of use at high volume levels.
Polyetherimide Tweeter
With its 0.5-inch polyetherimide tweeter that has a balanced dome design, the Kicker 43DSC504 ensures the production of bright and clear highs, while its neodymium magnet is a huge help in delivering a more powerful high-frequency performance. The speaker also utilizes Kicker's Extended Voice Coil technology as well, allowing it to deliver deep lows and perfectly match the tweeter's shimmering highs.
Power Handling
Kicker 43DSC504 can deliver a continuous power output of 50 Watts RMS and a maximum power of 200 Watts at 4 ohms per pair. With a frequency response of 45 Hz up to 20 kHz and a sensitivity rate of 90 dB, you can be sure that you'd get an extensive full-range frequency reproduction while having minimal distortion at high volume levels.
Brand | Kicker |
Speaker Size | 5.25 |
Design | 2-way |
Tweeter Design | 1/2" Balanced Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | PEI |
Woofer Composition | Polypropylene |
Woofer Surround | Polyester Foam |
Sensitivity (1W at 1 meter) | 90 |
Sensitivity at 2.83 volts | N/A |
Frequency Response | 45 - 20k Hz |
Minimum RMS Wattage | N/A |
Maximum RMS Wattage | 50 |
Peak Power Handling (Watts) | 200 |
Top-mount Depth (Inches) | 1.8125 |
Bottom-mount Depth (Inches) | 2.0625 |
Cutout Diameter or Length (inches) | 4.5 |
Mounting Height (Inches) | 0.279 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |