We are a Kenwood authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 2-way marine speakers with fixed white grilles
• LED remote control
• CR2025 battery (installed)
• 10" Link Cable A (male to male LED power)
• 10" Link Cable B (male to female LED power
• (4) 1-1/4" Heat shrink tubes
• (8) 1" Stainless steel mounting screws
• (8) Stainless steel speed-clips
• Owner's Manual
Tweeters Mounted to the Grilles
The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
LED Lights Available
There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes.
Water-resistant
Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer. Water-resistant PP Cone (IPX5), UV resistant woofer grille and cone
12 volt power supply
A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's.
| Brand | Kenwood |
| Speaker Size | 6.5 |
| Design | 2-way |
| Sensitivity | 86 dB at 1 watt |
| Frequency Response | 65 - 21k Hz |
| Max RMS Power Handling | 75 |
| Peak Power Handling (Watts) | 260 |
| Impedance (Ohms) | 4 |
| Top-mount Depth (Inches) | 2-5/8 |
| Bottom-mount Depth (Inches) | N/A |
| Cutout Diameter or Length (inches) | 5.75 |
| Bolt Circle | 6.1915 |
| Tweeter Design | 1/2" Balanced Dome |
| Tweeter Composition | PEI |
| Woofer Composition | Injected Polypropylene |
| Woofer Surround | Rubber |
| Parts Warranty | 1 Year |
| Labor Warranty | 1 Year |
