We are a Kenwood authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•Mono subwoofer amplifier
•Two 30-amp ATC fuses (installed)
•Terminal cover (installed)
•8" Speaker level input harness
•Four 5/8" Screws
•Instruction manual (English/ French/ Spanish)
•Owner's Manual
Can Produce a Powerful Bass Performance
A mono subwoofer amplifier belonging to Kenwood's flagship brand, Excelon, the X502-1 is a compact amplifier that can produce a powerful bass performance. Thanks to its sleek design, you can easily install the amplifier anywhere in your vehicle.
Able to Produce a Lot of Power With Excellent Sound Quality
With its Class-D amplifier technology, the X502-1 is able to produce a lot of power with excellent sound quality, even with its small stature. Its output coil comes with a magnetic shield, greatly reducing noise while improving sound quality. For its heat management system, it has an extruded aluminum heat sink design, which is highly efficient in dissipating the heat that has build-up from long periods of usage.
It Also Has a Maximum Output Power
The Kenwood Excelon X502-1 can handle a power output of 300 Watts RMS per channel at 4 ohms and 500 Watts RMS per channel at 2 ohms. It also has a maximum output power of 1000 Watts. Its frequency response of 20 up to 200 Hz and a signal-to-noise ratio of 85 dB tell it all that this amplifier can produce an accurate bass reproduction at loud volume levels with only minimum distortion.
| Brand | Kenwood |
| RMS Power Output (Watts x Channels) | 300 x 1 |
| Peak Power Output (Watts x Channels) | 1000 x 1 |
| Power at 2 Ohms (Watts x Channels) | 500 x 1 |
| Bridged Power (Watts x Channels) | N/A |
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 50-200 Hz |
| Low-Pass Slope (dB/octave) | 24 dB/octave |
| High-Pass Crossover Frequency | N/A |
| High-Pass Slope (dB/octave) | N/A |
| Minimum Impedance Bridged | N/A |
| Minimum Impedance Unbridged | 2 |
| Minimum Impedance | 2 |
| Best Frequency Response | 20-200 Hz |
| THD at Rated RMS Power | 0.01 |
| Signal to Noise Ratio | 85 dB |
| Input Voltage | 14.4v |
| Bass Boost | 0-18 dB |
| Bass Boost Frequency | 40 Hz |
| Fan Cooled | No |
| Fuse Rating | 60 |
| Speaker Level Inputs | Yes |
| Preamp Outputs | No |
| Width (inches) | 8 7/16" |
| Height (inches) | 2 1/8" |
| Depth (inches) | 5 15/16" |
| Parts Warranty | 2 Years |
| Labor Warranty | 2 Years |
