We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• Five-channel amplifier
• 2.5mm Allen wrench
• Self-adhesive JL Audio badge
• Owner's manual
High Quality Amplifier
Designed to power up almost any car audio system, the JL Audio XD700/5v2 can handle two pairs of speakers and a mono subwoofer, giving you a high-quality, full-range frequency audio output that every audiophile would surely love. With its compact chassis, you do not have to worry about installing it on your vehicle, even in tight spaces.
NexD Switching Technology
JL Audio XD700/5v2 utilizes its in-house NexD Switching technology, which uses a self-oscillating modulator to cancel out the noise that comes from the power supply voltage fluctuation. It also has an Advanced Rollback Protection System, which turns down the amp's peak output until it cools down and reaches its safe operating temperature to avoid unnecessary shutdowns. It is also equipped with differential-balanced inputs designed to protect the amplifier from the noise of typical car audio wiring setups.
Power Handling
The JL Audio XD700/5v2 can deliver a power output of 75 Watts RMS in its four channels and 180 Watts RMS in its subwoofer channel at 4 ohms. It can also handle a continuous power output of 100 Watts in its four channels and 300 Watts in its subwoofer channel at 2 ohms.
Variable High-Pass and Low-Pass Filter
The amplifier's Channel 1 and 2 has variable high-pass filter from 50 to 5000 Hz, while channel 3 and 4 have variable high-pass and bandpass filters from 50 to 500 Hz. Lastly, JL Audio XD700/5v2’s subwoofer channel has a low-pass filter from 50 to 500 Hz. These controls allow you to have a more defined audio quality performance from the amplifier.
| Brand | JL Audio |
| RMS Power Output (Watts x Channels) | 75 x 4, 300 x 1 |
| Peak Power Output (Watts x Channels) | N/A |
| Power at 2 Ohms (Watts x Channels) | 100 x 4 |
| Bridged Power (Watts x Channels) | 200 x 2 |
| Minimum Impedance Bridged | 4 |
| Minimum Impedance Unbridged | 2 |
| Minimum Impedance | 2 |
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 50-500 Hz |
| Low-Pass Slope (dB/octave) | 12 or 24 dB/octave |
| High-Pass Crossover Frequency | 50-500 Hz |
| High-Pass Slope (dB/octave) | 12 dB/octave |
| Best Frequency Response | 12-22000 Hz |
| THD at Rated RMS Power | 0.01 |
| Signal to Noise Ratio | 84 dB |
| Input Voltage | 14.4v |
| Bass Boost | No |
| Bass Boost Frequency | N/A |
| Fan Cooled | No |
| Fuse Rating | 60 |
| Speaker Level Inputs | Yes |
| Preamp Outputs | No |
| Width (inches) | 10 1/4" |
| Height (inches) | 2" |
| Depth (inches) | 7 1/8" |
| Parts Warranty | 1 Year |
| Labor Warranty | 1 Year |
