We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•Six-channel amplifier
•2.5mm Allen wrench
•Self-adhesive JL Audio badge
•Owner's Manual
Fits Comfortably
This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its six channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD™ ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.
The Possibilities Are Endless.
With the XD600/6v2, you have lots of great options. Use it as a six-channel satellite amplifier with 75 W x 6 @ 4 Ω, or bridge four of its channels to create a staggered power four-channel amplifier with 200 W x 2 @ 4 Ω for your front satellites and 75 W x 2 @ 4 Ω for your rear satellites. You can also drive two subwoofers with 200 W each, plus a pair of satellites with 75W x 2.
Brushed Aluminum Cover
TThe XD600/6v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.
V2 Spec Feature
All three filters offer continuously variable cutoff frequency selection from 50-500 Hz. This amplifier's filters can also be configured as a true 3-way crossover, with a low-pass filter for the subwoofer channel, a bandpass filter on Ch. 3 & 4, and a high-pass filter on Ch. 1 & 2. An "x10" multiplier switch on the Ch. 1 & 2 high-pass filter allows its cutoff frequency to be adjusted from 50-500 Hz or 500-5000 Hz.
| Brand | JL Audio |
| RMS Power Output (Watts x Channels) | 75 x 6 |
| Peak Power Output (Watts x Channels) | N/A |
| Power at 2 Ohms (Watts x Channels) | 100 x 6 |
| Bridged Power (Watts x Channels) | 200 x 3 |
| Minimum Impedance Bridged | 4 |
| Minimum Impedance Unbridged | 2 |
| Minimum Impedance | 2 |
| Amplifier Class | D |
| Low-Pass Crossover Frequency | 50-500 Hz |
| Low-Pass Slope (dB/octave) | 12 dB/octave |
| High-Pass Crossover Frequency | 50-500 Hz |
| High-Pass Slope (dB/octave) | 12 dB/octave |
| Best Frequency Response | 12-22000 Hz |
| THD at Rated RMS Power | 0.01 |
| Signal to Noise Ratio | 104 dB |
| Input Voltage | 14.4v |
| Bass Boost | No |
| Bass Boost Frequency | N/A |
| Fan Cooled | No |
| Fuse Rating | 50 |
| Speaker Level Inputs | Yes |
| Preamp Outputs | No |
| Width (inches) | 10 1/4" |
| Height (inches) | 2" |
| Depth (inches) | 7 1/8" |
| Parts Warranty | 1 Year |
| Labor Warranty | 1 Year |
