We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 3-1/2" 2-way speakers
• (4) Self-tapping screws (#8 x 1")
• (4) Speed clips
• (2) crimpable female quick slides (0.205"/5.2mm)
• (2) crimpable female quick slides (0.11"/2.8mm)
Owner's Manual
The Evolution C2 systems
Small but mighty, the JL Audio C2-350x is a mid-level 2-way car speaker that can deliver a clean and dynamic full-range audio quality. Belonging to JL Audio's Evolution C2 Series, the JL Audio C2-350x can give you all the highs and lows your vehicle's audio system has been missing before.
Vast woofer design
These 3.5-inch car speakers come with polypropylene cones and polyether foam surrounds to give you the thundering and accurate bass output that you are looking for while still having the endurance and toughness to withstand the wear and tear from extended hours of use at high volume levels.
Silk Dome Tweeter
It has a 0.75-inch silk dome tweeter that can produce a smooth, bright, and precise high-frequency performance with a minimal breakup and reduced ringing at near-peak volume levels. The JL Audio C2-350x also has a built-in crossover network to direct signal flow for a more defined audio quality.
Can Go Loud With Minimal Distortion
The JL Audio C2-350x can handle 25 Watts of RMS power and a peak power output of 75 Watts at 4 ohms. It has a frequency response of 130 Hz to 22 kHz and a sensitivity rate of 83 dB, which only means that the C2-350x can go loud with minimal distortion when you crank up the audio source's volume level.
Brand | JL Audio |
Speaker Size | 3.5 |
Design | 2-way |
Tweeter Design | Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | Silk |
Woofer Composition | Mica-filled Polypropylene |
Woofer Surround | Polyether Foam |
Sensitivity (1W at 1 meter) | 83 |
Sensitivity at 2.83 volts | 86 |
Frequency Response | 130 - 22k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 25 |
Peak Power Handling (Watts) | 75 |
Top-mount Depth (Inches) | 1.5625 |
Bottom-mount Depth (Inches) | 1.6875 |
Cutout Diameter or Length (inches) | 3.1875 |
Mounting Height (Inches) | 0.562 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |