We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• (2) 3-way speakers
• (2) Bottom mount brackets
• (8) 1-1/2" Screws (#8)
• (8) Speed clips
• (2) 0.187" Crimpable female quick slides
• (2) 0.110" Crimpable female quick slides
• Owner's manual
Giving It the Edge Over Its Competition in Its Class
Though JL Audio has always been known for its premium products, its entry-level speakers, including the C1-690tx, are worth upgrading. If you do not want to break the bank in replacing your stock speakers, then you should consider going for this one. With its expertise in top-notch speakers, JL Audio applied some technologies in its C1 Series, giving it the edge over its competition in its class.
Polypropylene Cone With a Rubber Surround
This 3-way car speaker comes with a polypropylene cone with a rubber surround, ensuring a natural and accurate low-frequency production with minimal distortion. It also gives durability to the JL Audio C1-690tx, allowing it to withstand any effects that come with long hours of use, especially at high volume levels.
Made of Aluminum and Has an Edge-driven Dome Design
The JL Audio C1-690tx also comes with a 1-inch edge-driven tweeter and a 0.75-inch supertweeter made of aluminum and has an edge-driven dome design, allowing it to deliver sparkling and bright highs with a minimal breakup, even at high volume levels. Using a DMA-optimized motor allows it to have improved performance and gives it the ability to go louder than usual speakers in the market.
Being Able to Go Loud at High Volume Levels With Reduced Distortion
It can handle a power output of 60 Watts RMS and can go up to 225 Watts of peak power at 4 ohms. The JL Audio C1-690tx has a frequency response of 36 Hz up to 24 kHz and a sensitivity rate of 93 dB at 2.83 volts, which means that it can give you an extensive full-range frequency performance while being able to go loud at high volume levels with reduced distortion.
Brand | JL Audio |
Speaker Size | 6X9 |
Design | 3-way |
Tweeter Design | 1" Edge-Driven Dome |
Impedance (Ohms) | 4 |
Tweeter Composition | Aluminum |
Woofer Composition | Mineral-Filled injection-Molde |
Woofer Surround | Rubber |
Sensitivity (1W at 1 meter) | 90.5 |
Sensitivity at 2.83 volts | 93 |
Frequency Response | 36 - 24k Hz |
Minimum RMS Wattage | 10 |
Maximum RMS Wattage | 60 |
Peak Power Handling (Watts) | 225 |
Top-mount Depth (Inches) | 3.125 |
Bottom-mount Depth (Inches) | 3.9375 |
Cutout Diameter or Length (inches)Mounting Height (Inches) | 0.777 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |