We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•(1) 12" Thin-Line subwoofer
•Grille
•Owner's manual
It Has a Cast Alloy Frame
With a blend of top-notch excursion capacity and shallow mounting design, the JL Audio 12TW1-4 is built to give you that powerful bass output JL Audio subwoofers are famous for while being fitted in tight spaces. It has a cast alloy frame to add some durability and stability to the JL Audio 12TW1-4, so this subwoofer's longevity is never a question.
Has a Mica-filled Polypropylene Cone
The JL Audio 12TW1-4 has a mica-filled polypropylene cone and a rubber surround, which gives it the rigidity and durability to withstand the effects of constant use at high volume levels while producing an accurate bass response with only minimal distortion.
Famous Concentric Tube Suspension
It utilizes JL Audio's DMA-optimized motor design, which helps lessen the distortion while producing a clean and punchy low-frequency performance. The JL Audio 12TW1-4 also has the company's famous Concentric Tube Suspension, which significantly improves the subwoofer's excursion, allowing for more air pressure and resulting in louder and better bass performance.
Has a Power Handling of 300 Watts RMS
The JL Audio 12TW1-4 has a power handling of 300 Watts RMS and peak power of 600 Watts at 4 ohms. It has a frequency response of 24 to 200 Hz and a sensitivity rate of 85.15 dB, allowing the subwoofer to go deep and loud with less noise.
Brand | JL Audio |
Size | 12 -inch |
Impedance (Ohms) | 4 |
Cone Material | Mica-filled Polypropylene |
Surround Material | Rubber |
Port diameter (inches) | N/A |
Port length (inches) | N/A |
Max RMS Power Handling | 300 |
Peak Power Handling (Watts) | 600 |
Top Mount Depth (inches) | 4.625 |
Bottom Mount Depth (inches) | N/A |
Cutout Diameter or Length (inches) | 11.0625 |
Free-Air | No |
Dual Voice Coil | No |
Sensitivity | 85.15 dB at 1 watt |
Frequency Response | 24 - 200 Hz |
Vas (liters) | 33.67 |
Fs (Hz) | 32.35 |
Qts | 0.529 |
Xmax (millimeters) | 10 |
Ideal Sealed Box Volume (cubic feet) | 0.65 |
Minimum Sealed Box Volume (cubic feet) | 0.52 |
Maximum Sealed Box Volume (cubic feet) | 0.95 |
Ideal Ported Box Volume (cubic feet) | 1.125 |
Minimum Ported Box Volume (cubic feet) | 0.9 |
Maximum Ported Box Volume (cubic feet) | 1.36 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |