We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•(1) 10" Subwoofer
•Black plastic trim ring
•Owner's manual
Efficient Thermal Management
A 10-inch subwoofer that is a perfect pair for an amplifier with a power output of 150 up to 500 Watts range, the JL Audio 10W3v3-2 is a highly touted product known for its power and accurate audio performance.
The subwoofer has a stamped steel basket with an elevated cooling frame design for efficient thermal management, allowing quick heat dissipation from extended use at higher volume levels and protecting the motor from getting damaged. Its DMA-optimized motor design allows the subwoofer to perform and produce a clean bass with minimal distortion.
Better Excursion Performance
Using the company's patented floating cone attached method, the bonding of the polypropylene cone and rubber surround assembly to the spider assembly results in the subwoofer's better excursion performance and ability to produce better bass. Its patented Vented Reinforcement Collar improves the stability of the voice coil/spider/cone junction and helps in better thermal performance.
Can Last a Very Long Time
The JL Audio 10W3v3-2 has a continuous power of 500 Watts and can go up to 1000 Watts peak power with an impedance of 2 ohms. With a frequency response of 25 up to 250 Hz and a sensitivity of 85.37 dB, you can say that this subwoofer can go hard with the deep bass, while it won't have any problems with volumes being cranked up at high levels.
Made in the USA using global components, you can trust that this subwoofer can last a very long time while giving you the audio quality you want in a car subwoofer.
Brand | JL Audio |
Series | W3 v3 Series |
Subwoofer Size | 10" |
RMS Power Handling | 500 watts |
Voice Coil(s) | Single |
Impedance (Per Voice Coil) | 2 ohms |
Frequency Response | 25 - 250 Hz |
Sensitivity | 85.37 dB |
Xmax (millimeters) | 14 mm |
Subwoofer Design | Round / Circle |
Main Cone Color | Black |
Woofer Composition | Mineral-Filled Polypropylene |
Woofer Surround | Nitrile Butadiene Rubber NBR |
Subwoofer Grille | Optional (Accessory required and sold separately)JL Audio SGRU-10 |
Re-Cone Kit Available | No |
Recommended Enclosure Type | Ported / Vented Sealed |
Optimum Sealed Box Volume | 0.625 cubic feet |
Optimum Ported Box Volume | 1.25 cubic feet |
Top-Mount Depth (Mounting Depth) | 5.93" |
Cutout Diameter | 9.0625" |
Shallow Mount Installation | No |
Free-Air Resonance (Fs) | 32.97 Hz |
Equivalent Compliance (Vas) | 32.17 liters |
Total Speaker Q Value (Qts) | 0.495 |
Electrical Q Value (Qes) | 0.533 |
Electrical Resistance of Voice Coil (Re) | 1.70 ohms |
Mechanical Q Value (Qms) | 7.027 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |