We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
•(1) 10" Thin-Line 2-ohm subwoofer
•Grille (installed)
•Owner's manual
Lot of Impressive Features
A car subwoofer with a shallow-mount design and comes with a lot of impressive features, the JL Audio 10TW1-2 is the perfect upgrade for your car's factory subs. This 10-inch subwoofer has the ability to put in some heart-pounding bass and would not need too much space to be installed inside your vehicle.
Has a Mica-filled Polypropylene Cone
It has a mica-filled polypropylene cone and a rubber surround, which gives the subwoofer the needed rigidity and durability to withstand the effects of extended usage at high volume levels while being able to produce an accurate bass response with only minimal distortion.
Louder and Better Bass Performance
It uses JL Audio's DMA-optimized motor design, which helps reduce the distortion while being able to produce a clean and punchy low-frequency performance. It also has JL Audio's famous Concentric Tube Suspension, which significantly improves the subwoofer's excursion, allowing for more air pressure, and resulting in louder and better bass performance.
Deep and Loud With Less Distortion
The JL Audio 10TW1-2 has a power output of 300 Watts RMS and can reach up to 600 Watts of peak power. It has a frequency response of 26 up to 200 Hz and a sensitivity rate of 82.5 dB, which allows the subwoofer to go really deep and loud with less distortion.
Brand | JL Audio |
Size | 10 -inch |
Impedance (Ohms) | 2 |
Cone Material | Mica-filled Polypropylene |
Surround Material | Rubber |
Port diameter (inches) | N/A |
Port length (inches) | N/A |
Max RMS Power Handling | 300 |
Peak Power Handling (Watts) | 600 |
Top Mount Depth (inches) | 4.375 |
Bottom Mount Depth (inches) | N/A |
Cutout Diameter or Length (inches) | 9.0625 |
Free-Air | No |
Dual Voice Coil | No |
Sensitivity | 82.5 dB at 1 watt |
Frequency Response | 26 - 200 Hz |
Vas (liters) | 10.31 |
Fs (Hz) | 41.45 |
Qts | 0.649 |
Xmax (millimeters) | 10 |
Ideal Sealed Box Volume (cubic feet) | 0.35 |
Minimum Sealed Box Volume (cubic feet) | 0.28 |
Maximum Sealed Box Volume (cubic feet) | 0.54 |
Ideal Ported Box Volume (cubic feet) | 0.625 |
Minimum Ported Box Volume (cubic feet) | 0.5 |
Maximum Ported Box Volume (cubic feet) | 0.87 |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |