iDatalink Maestro HRN-HRR-SU2

We are a iDataLink Maestro authorized dealer so you get up-to-date, fully warrantied products.

What's Inside?
•Vehicle/Radio harness
•Front speaker harness
•Rear speaker harness
•Backup camera harness
•"A" harness
•"B" harness
•"C" harness
•OBDI harness
•2-Wire harness
• User's Manual

Allows You to Connect a New iDatalink-ready Car Stereo
This HRN-HRR-SU2 interface harness from iDatalink allows you to connect a new iDatalink-ready car stereo in select 2012-21 Subaru, Scion, and Toyota vehicles, working in conjunction with iDatalink's Maestro ADS-MRR or ADS-MRR2 module. Once connected, you'll retain the use of your Subaru's steering wheel audio controls.

Be Able to Display Factory Vehicle Settings
You'll also keep your vehicle's's amp and subwoofer (if present) as well as the factory Starlink connection and secondary vehicle display (if equipped) and vehicle backup camera (front and side camera retention requires a second camera input on your aftermarket receiver). You'll also be able to display factory vehicle settings, engine performance data, and other vehicle info on your receiver's screen.

Provides Accessory Power and Illumination Outputs
The harness also provides accessory power and illumination outputs, and provides the outputs (parking brake, reverse light, and speed sense) you'll need to install a navigation receiver. The package includes three connectors that plug in between the Maestro module, your vehicle radio's wiring plugs, and your new car stereo.

Splice Together This Harness's Power/ground
You'll have to solder or splice together this harness's power/ground, illumination, and speaker output wires to the corresponding wires on your aftermarket receiver's wiring harness.This harness also features an in-line head-unit connector harness, which will plug into their new "Head-unit direct" harnesses for select radio brands, which eliminate the need to splice any wires.