We are a Alpine authorized dealer so you get up-to-date, fully warrantied products.
What's Inside?
• 4-Channel amplifier
• 12" Input/Output/Power harness
• Head unit (iLX-W650) mounting bracket
• (2) Universal mounting brackets
• (4) M5x6mm Allen head machine screws (3mm)
• (2) M2.6x8mm Machine screws
• (4) 3/8" Screws
• (4) 7" Zip Ties
• Owner's Manual (English/ French/ Spanish)
• Warranty information
• On-line product registration information
Full-Range Car Amplifier
If you are using an Alpine iLX-W650 or iLX-W407 multimedia receiver and are looking for the perfect full-range car amplifier to power up your vehicle's audio system, then the Alpine KTA-450 may be what you are looking for.
Alpine's Dynamic Peak Power technology
Although it can work with other receivers, the Alpine KTA-450 is designed to be mounted on the back of the mentioned Alpine receivers above with the help of a PowerStack bracket. Using Alpine's Dynamic Peak Power technology, the amplifier can automatically adjust its gain to produce a more powerful audio output that is perfect for your musical needs.
Class-D amplifier
With its Class-D amplifier, the Alpine KTA-450 can deliver a power output of 50 Watts RMS at 4 ohms and 45 Watts at 2 ohms. It has a sensitivity rate of 83 dB and a frequency response of 15 Hz up to 50 kHz, which are highly impressive figures, considering its tiny chassis.
Weather-Resistant Car Amplifier
This weather-resistant car amplifier comes with a selectable high-pass filter for your audio system's front and rear channels, giving you a more defined audio quality. The Alpine KTA-450 also has a selectable two or 4-input channel, giving you more flexibility in your audio setup.
Brand | Alpine |
RMS Power Output (Watts x Channels) | 50 x 4 |
Peak Power Output (Watts x Channels) | 100 x 4 |
Power at 2 Ohms (Watts x Channels) | 45 x 4 |
Bridged Power (Watts x Channels) | 100 x 2 |
Minimum Impedance Bridged | 4 |
Minimum Impedance Unbridged | 2 |
Minimum Impedance | 2 |
Amplifier Class | D |
Low-Pass Crossover Frequency | N/A |
Low-Pass Slope (dB/octave) | N/A |
High-Pass Crossover Frequency | Off, 60, 80, 120Hz |
High-Pass Slope (dB/octave) | 12 dB/octave |
Best Frequency Response | 15-50k Hz |
THD at Rated RMS Power | 0.01 |
Signal to Noise Ratio | 82 dB |
Input Voltage | 14.4v |
Bass Boost | No |
Bass Boost Frequency | N/A |
Fan Cooled | No |
Fuse Rating | 20 |
Speaker Level Inputs | Yes |
Preamp Outputs | No |
Width (inches) | 7" |
Height (inches) | 1 3/8" |
Depth (inches) | 3 9/16" |
Parts Warranty | 1 Year |
Labor Warranty | 1 Year |